Filter
Top Products
PREPROGRAMMING SYSTEM MESSAGES
System messages can only be programmed or permanently changed at
port 00, station number _____(usually 200). Five preprogrammed
messages are automatically stored in memory when the Alphanumeric
Messaging with LCD feature is initialized.
60) OUT TO LUNCH
61) IN A MEETING
62) CALL __________________________
63) BACK AT ________________________
64) RETURN ON ______________________
You can use these messages and add 35 more messages designed
specifically for your system, or you can overwrite the initialized messages
and program up to 10 of your own. Any messages programmed at port
00 will remain in memory until canceled from port 00 or until the system
is reinitialized. After reinitialization, only the original five messages will be
in memory. System messages are written and stored in memory as
explained in Storing a Message.
ADDING TO PREPROGRAMMED MESSAGES
When you select a message, it appears on your station display. A cursor
(–) also appears immediately to the right of the last letter in the message.
You can now input additional information (up to a total of 32 digits for
each message). Some system messages may expect you to add more
information. For example:
1. CALL _______________________
■ Add a station or outside telephone number.
2. BACK AT __________________________
■ Add the time you will return.
3. RETURN AT _____________________________
■ Add the date you will return.
NOTE: Refer to Recording a Message for adding to a preprogrammed
message.
STRATA DK MESSAGES AND MEMOS
4-3