Filter
Top Products
The Basics
Conference Calls
16 Strata CTX DKT/IPT Telephone 11/03
Conference Split/Join/Drop
If you initiate a conference with two or more parties, you and another member of the
conference can leave (Split) the conference for a private conversation. During this
time, other conference members remain connected.
You can then Join both of you back into the conference, or you can Drop (disconnect)
the member you are connected to. This feature is performed with Soft Keys if you
have a 3000-series LCD phone or on a 2000-series LCD phone with a Split button
created on one of your flexible buttons.
Important! DKT2000-series telephones don’t display the SPLT soft key, so you must
create a
6SOLW key using the feature key assignment method.
(See“Setting/Changing a Flexible Button’s Function” on page 73.)
The Split feature requires Strata CTX R2.2. This feature also works for remote
stations which are connected through Strata Net QSIG.
Important! You must be a conference master to perform the Split and Drop features.
The conference master is the person that initiates the conference call. If
that person drops from the conference, the first person added to the
conference becomes the conference master.
➤ To Split from a conference
1. While in a conference call on a DKT3000
phone, press the
SPLT (Split) soft key or Split
button. The telephone LCD shows first
conference party member.
2. Press the number of the party that you want to
Split out of the conference.
Example (shown right), if you want to Split
with extension 200, press the
NEXT soft key
until you see 200. Then press the number shown
to the left of it (
) on the dial pad.
7032
EXIT CONF SPLT
200+202
Mode Page Scroll Feature
7033
RTRN NEXT
1:200
Mode Page Scroll Feature