Strata CTX DKT/IPT Telephone 11/03 7
The Basics 2
This chapter shows you the basic operation of your DKT3000-series telephone,
IPT1020-SD, or DKT2000-series telephone.
Important! The text in this chapter applies to the DKT3000-series telephones,
IPT1020-SD, and DKT2000-series telephones, unless otherwise noted.
Important - Read First
Be sure to check with your CTX System Administrator and make sure you know
which features are enabled on your system. Use the check boxes
❐ throughout this
book to mark which features you have.
Note LEDs on your telephone flash at different speeds depending on the function
performed. Flash rates can be found under “LED Indicator Details” on page 80.
What’s My Line?
Throughout this guide, the word “Line” is mentioned. For example, you will be
instructed to “select a Line.” “Line” can be:
❐ Linebutton
❐ Pooled Line Group button
❐ Group Line button
❐ Line out requiring an access code - where you enter an outside line or line group
access code (for example, dialing
to get an outside line).
Check mark which Line type you have, then use that selection when instructed to
“select a Line.”