Filter
Top Products
IPT1020-SD Settings
IPT1020-SD Function Settings
Strata CTX DKT/IPT Telephone 11/03 99
IPT1020-SD Function Settings
These steps enable you to turn On/Off button beeps, room noise cancellation, handset
Busy Override, and headset volume control. You can also adjust the setting for carbon
headsets vs. non-carbon headsets.
1. Press
++++ROG (simultaneously).
2. Press
then +ROG.
3. Press the Feature Buttons to turn the LEDs On/Off (see Table 16).
4. Press
+ROG to set the above data.
5. Go off-hook and hang up.
4. Registering
to BIPU
When registering fails, IPT retries by starting at
Step 2 again.
Error message:
“Exxx” is error
number.
5. Registering
completion
- normal
action.
LCD data is indicated from
CTX. Example:
Table 16 IPT1020-SD Function Settings
FB LED ON LED OFF
FB1
Buttons beep. Buttons do not beep.
FB3
Speakerphone/Microphone sensitivity
is lower.
Speakerphone/Microphone sensitivity is
normal.
FB4
Enable handset Busy Override (BOV)
tone.
Disable handset BOV.
FB11
Turn LED On if carbon headset is
attached.
Turn LED Off if carbon headset is not
attached.
Action LCD Indication Remarks
Registering IPT
Registering IPT
Can’t register IPT:EXXX
NO. 205
FEB 28 THURSDAY 01:09