Filter
Top Products
7
After the battery pack is fully charged;
Operation Approx. battery life
While in use (Talk mode) up to 6 hours
While not in use (Standby mode) up to 7 days
When TALK/BATT LOW LED blinks, all handset buttons are disabled
and the battery needs to be charged. If you are during a call, you hear
short beeps. Finish the call as soon as possible and place the handset
on the base unit.
Note
If a call comes in when the battery is too low to operate properly, you will be unable to answer the
call or the call will be disconnected.
WALL MOUNTING
MOUNTING ON A STANDARD WALL PLATE
Insert the bracket's tab into the
base's lower tab slots, then press
down on the top of the bracket to
snap it into the clip slots.
Raise the antenna.
AC Adaptor
Power Outlet
(AC 120V, 60Hz)
Single-Line
Telephone Jack
(RJ11C)
Telephone
Line Cord
Flip the switch hook
tab over so the tab
holds the handset.