Filter
Top Products
16
2. DIALING A STORED NUMBER
q Pick up the handset and press
TALK
.
The TALK/BATT LOW LED lights.
w Press
MEM
.
e Enter the memory address (0 to 9).
The stored number will be dialed.
Note
If you enter a memory address which does not have any stored number, error beeps sound.
3. ERASING A STORED TELEPHONE NUMBER
q Pick up the handset. (Do not press the
TALK
button.)
w Press the
MEM
button twice.
e Enter the memory address button (0 to 9) you wish to erase.
When erasing is completed, you will hear a long beep.
4. INSERTING A PAUSE IN MEMORY
Use
PAUSE
to make an outgoing call through a PBX or long distance.
Each time you press
PAUSE
, a pause of about two seconds is inserted
during the dialing sequence. If more than two seconds are needed,
press
PAUSE
twice.
EXAMPLE: To store “0
PAUSE
1234567890” in memory address 4,
press:
MEM
0
PAUSE
1
2
3
4
5
6
7
8
9
WX
0
MEM
4
.5. CHAIN DIALING
Combining ordinary dialing and memory dialing, you can dial a long
telephone number with less steps.
EXAMPLE: Divide the number into two portions and store the first portion
in memory address 1 and the second portion in memory address 2.
When you call, press following buttons;
TALK
MEM
1
MEM
2