Filter
Top Products
14
USING A HEADSET
You can talk with hands-free convenience using an optional headset
(part #. RC008260) that has a 3/32-inch(2.5mm) plug.
To connect the headset, open the rubber
cover on the left side of the handset, then
insert the headset’s plug into the jack.
With a headset connected, you can make or
answer calls as usual using the keys on the
handset.
You can use the supplied Belt Clip to hang
the handset on your belt for greater
convenience.
When you finish using the headset,
disconnect it from the handset and close the
rubber cover to protect the jack.
Notes
• The handset’s earspeaker and microphone are turned off with a headset connected.
• Pressing the / button of the handset also controls the connected headset’s volume.
• If you place the handset on the base unit while the headset is connected, be sure the handset is
placed properly.