Filter
Top Products
6
RedBlack
2. CHARGE THE BATTERY PACK
Note
Use only the supplied battery pack (TRB-8000; power source
600 mAh, 3.6V).
q Remove the battery compartment cover
on the back of the handset by sliding it
down.
w Plug the battery pack cord into the
connector in the battery compartment in
correct polarity. It fits in only one way.
e Place the battery pack in the battery
compartment.
r Put the battery compartment cover back
by sliding until it snaps into place. Make
sure not to get the wires of the battery pack
caught in the cover.
t Place the handset on the base unit.
Be sure the IN USE/CHARGE LED lights.
If the IN USE/CHARGE LED does not
light, make sure the AC adaptor is plugged
in securely and that the electrical outlet is
working and not controlled by a light
switch.
It is important to charge the battery for
12 to 16 hours continuously without
any interruption before you use the
handset for the first time.
Note
The battery pack is not charged properly if the charging contacts are dirty or tarnished. Clean the
contacts occasionally with a dry cloth.
IN USE/
CHARGE
LED
Charging contacts