Filter
Top Products
Advanced Operation
Call Waiting
26 Strata CTX DKT3001/2001 Digital Single Line Telephone 01/02
Notes
1. The Primary extension number is the directory number by which the phone set is
defined. Other, non-primary extension numbers may also appear on the phone. By
convention, the Primary extension number is assigned to the first button on a
multi-button telephone.
2. If more than one call is on hold, the call on the telephone’s lowest button number is
picked up.
3. Ringing calls are picked up over held calls as a priority.
Call Waiting
You can answer a call that is transferred to your station, even when your station is
busy. When another call is camped onto your station, you hear two Camp-on tone
beeps and the extension or Line LED flashes red (on-hold).
If a call is sent to your station when busy, and your station does not have an extension
button available to receive the call, two camp-on tone beeps are sent to your
telephone. You must disconnect or transfer the existing call to answer the waiting call.
➤ To answer a waiting call by disconnecting or transferring the current call
➤ Hang up or transfer the existing call; the camped-on call rings your station. The
camped-on line rings your telephone. For DKT3001 phones, the Line LED flashes
(incoming call).
For Calls On Hold: Dialing Description
Local Retrieve
Picks up a call held on the telephone from which it is dialed.
Remote Retrieve
+ Primary
Ext. No.
Retrieves a call held on the telephone specified extension
number.
Outside Line Retrieve
+ Outside
Line No. (1~128)
Picks up a call held on the specified CO line regardless of the
telephone placing the call on hold. Must enter three digits
(e.g., 007).
Directed Extension
Retrieve
+ Ext. No.
Picks up a call held on the specified extension number,
regardless of the instrument(s) on which it appears.
Table 3 Call Pickup Feature Codes (continued)