Toshiba DKA-UG-DKSLT-VB Telephone User Manual


 
Features
Speed Dial
38 Strata DK Digital Single Line Telephone 5/99
Speed Dial
Speed Dial enables you to call a telephone number by dialing a brief access code,
instead of having to dial the entire telephone number. There are two types of Speed
Dial numbers: Station Speed Dial numbers, which you can assign to Speed Dial
locations and System Speed Dial numbers, which are assigned from the System
Administrator’s station or an attendant console, but they can be used by other stations.
See your System Administrator if this feature doesn’t work. The
button on your
telephone may have been programmed for DTMF tones, rather than Speed Dial.
To store a station speed dial number
1. Lift the handset
...or lift the handset
and press
/LQH.
You hear dial tone.
2. Press.
You hear a short tone.
3. Press 
.
4. Enter the access code
where you wish to
store the telephone
number.
See Table 7 on Page 48.
5. Dial the CO line
number access code
to be stored.
See Table 4 on Page 46.
6. Enter the telephone
number.
The number can be up to 20 digits, including the CO line access
code.
7. Press.
You hear confirmation tone once the CO line access code and the
telephone number are stored. They will be automatically dialed
when you enter the Speed Dial access code.
Repeat this procedure to replace the stored telephone number with
a new one.