Toshiba DKA-UG-DKSLT-VB Telephone User Manual


 
Features
Call Forward (CF)
18 Strata DK Digital Single Line Telephone 5/99
To cancel Call Forward-External
Remote Call Forward—External Destination Change
If Call Forward-External mode is set at your station, you can change the forwarding
destination from a telephone outside of the system.
The destination is normally an external Public Telephone Network Number, but it can
also be an internal Directory Number.
Use the Speed Dial storage codes detailed on See Page 48. When
forwarding to an outside destination include the CO Line (or CO
Line group) access code before the telephone number.
Example: 8015833700, where
801 = CO Line access code
5833700 = Telephone number
Important! See Table 4 on Page 46 for CO Line/
Line Group access codes. The LCR
access code “9” cannot be used.
2. Lift the handset
...or lift the handset
and press
/LQH.
3. Press
.
4. Hang up.
Incoming calls will forward to the destination stored at Station
Speed Dial Location 49.
1. Lift the handset
...or lift the handset
and press
/LQH.
2. Press
.