Toshiba DKA-UG-DKSLT-VB Telephone User Manual


 
Features
Call Forward (CF)
Strata DK Digital Single Line Telephone 5/99 19
To change the destination number
1. Call into the Strata
DK system over a CO
line programmed for
the DISA feature.
You hear ring back tone signal, then internal dial tone for 10
seconds. Try again if you hear busy tone.
Note See the System Administrator for DISA
telephone numbers.
2. After you hear dial
tone, press
,
then enter a [PDN].
You hear a confirmation tone.
If a number is not dialed, the system automatically causes the
DISA CO line to ring at telephones as a normal incoming call.
Then, if the call is not answered within 15 seconds after the ringing
starts, it disconnects.
3. Enter the Remote Call
Forward-External
security code.
You hear a confirmation tone. See the System Administrator for the
access code.
4. Enter the new
destination number.
You can enter an
internal [PDN], or a
CO or Tie line access
code + an external
telephone number.
With some systems,
you can dial a line
group code instead of
a CO line number
access code (see
Table 4 on Page 46).
You cannot enter the
LCR access code
