Filter
Top Products
English
23
Base settings
8.3 Dial Mode
There are 2 types of dialling mode:
• DTMF/Tone dialling (most common used)
• Pulse dialling (for older installations)
To change the dialling mode:
8.4 Recall (Flash)
Press the Flash key “R” (Key 8 - Picture 2E) to use certain services on your external line
such as “call waiting” (if your phone company offers this feature); or to transfer calls if you
use a telephone exchange (PABX). The Flash key “R” is a brief interruption of the line.
You can set the flash time to 100ms or 250ms.
8.5 System PIN
The System PIN is used for registering and deregistering handsets and some other
optional settings. The default System PIN is 0000.
1 Enter the menu.
2 Select “Settings”.
3 Select “Set Base”.
4 Select “Dialling mode”.
5 Select “Tone” or “Pulse”.
6 Return to standby.
1 Enter the menu.
2 Select “Settings”.
3 Select “Set Base”.
4 Select “Recall Mode”.
5 Select “Recall 1” for short flash time (100ms) or “Recall 2” for long
flash time (250ms).
6 Return to standby.
1 Enter the menu.
2 Select “Settings”.
3 Select “Set Base”.
4 Select “System PIN”.
5 Enter the old PIN (0000 by default) and select “OK”.
6 Enter the new PIN, select “OK” and repeat this.
7 Return to standby.