Filter
Top Products
English
21
Personalise the handset
7.10 PABX Access code
It is possible to use your telephone with a prefix number. When dialling from the call list
or phonebook, this prefix will be dialled automatically before the number.
7.11 Redial length
It’s possible to set the redial length of 32 digits to 17 digits. By doing this you can prevent
to store for example your phone banking access data into the phones memory.
7.12 Receiving Volume
This sets the standard volume level for the handset earpiece.
7.13 Using the alarm feature
You can have different alarm setting for each handset registered to your base. The alarm
rings only at the handset, not at the base or any other handset. When an alarm is set, the
icon will appear on the top of the display.
1 Enter the menu.
2 Select “Settings”.
3 Select “Set Handset”.
4 Select “PABX Access Code”.
5 Select “Set code”.
6 Enter the prefix code, e.g. ‘0’ (1 digit only) and select “Save”.
OR
7 Select “On” or “Off”.
8 Return to standby.
When dialling manually a number, this prefix will not be dialled but has to be
entered manually.
1 Enter the menu.
2 Select “Settings” and confirm.
3 Select “Set Handset” and confirm.
4 Select “Long” for 32 digits or “Short” for 17 digits and confirm.
5 Return to standby.
1 Enter the menu.
2 Select “Settings”.
3 Select “Set Handset”.
4 Select “Receiving volume”.
5 Select the desired volume (1-8) and confirm.
6 Return to standby.