Filter
Top Products
16
Personalize the handset
6.5 Automatic answer
When there is a incoming call and the handset is on the base, the phone automatically takes the
line when lifted. This is the default setting, but can be set off:
6.6 Reset the handset
It is possible to return the phone to the original default configuration. This is the configuration
which was installed when you first received the telephone.
To return to default settings:
Default parameters are:
Low battery beeps On
Out of range warning beeps Off
Key tone On
Auto answer On
Internal melody 1
Internal volume 3
External melody 3
External volume 3
Ear volume 3
Phonebook Empty
Call log list Empty
Redial list Empty
PIN code 0000
Dial mode DTMF
Keypad lock Off
4 Enter the name you want and confirm.
Press the delete key to delete a character. Press and hold the phonebook key to
exit the menu without taking any modifications into account.
1 Enter the menu
2 Select “HANDSET” and confirm.
3 Select “AUTO ANSWER” and confirm.
4 Select “ON” to activate or “OFF” to deactivate and confirm.
1 Enter the menu
2 Select “SETUP” and confirm.
3 Select “DEFAULT” and confirm.
4 Enter the 4 digit PIN code (default =0000) and confirm.
Returning to default settings will delete all entries in the phonebook and call log.
The PIN code will also be reset to 0000.
4
GHI
6
MNO
5
JKL
4
GHI
6
MNO
5
JKL