Filter
Top Products
English
11
Using the telephone
3.10 Display of call duration
The call duration is displayed after 15 seconds, in minutes - seconds.
At the end of each call, the total call duration is displayed for 5 seconds.
3.11 Microphone mute
It is possible to mute the microphone during a conversation.
3.12 Pause key
When dialing a number you can add a pause between two digits:
3.13 Locating a handset (Paging function)
3.14 Redial memory
You can redial up to 10 of the last numbers called. If you have stored a name in the phonebook to
go with the number, the name will be displayed instead.
3.15 Using the alphanumerical keypad
With your telephone, you can also enter alphanumeric characters. This is useful for entering a
name into the phonebook, giving a name to the handset, ...
To select a letter, press the corresponding key as many times as necessary.
For example, to select an ‘A’, press ‘2’ once. To select a ‘B’, press ‘2’ twice and so on.
To select ‘A’ and then ‘B’ consecutively, press ‘2’ once, wait until the cursor moves on to the next
character, then press ‘2’ twice.
1 Press the mute key. You can talk freely without being heard by the calling
party.
“MUTE” is displayed.
2 Press the mute key again to return to normal mode.
1 Press the redial/pause key for 2 seconds.
1 Press the paging key on the base.
All handsets registered with the base will ring.
2 Press any key on the handset to stop the ringing.
1 Press the redial key.
2 Select a number. If the number is in the phonebook, the name will be
shown.
When the name is displayed, you can toggle between the name and the number
by pressing the OK key!
3 Press the off-hook key to start the call.
4 Press the on-hook key to return to standby.
Press ‘1’ to select a space.
Press the delete key to delete a character.
4
GHI
6
MNO
5
JKL