Filter
Top Products
4
Deskmaster
13.6 PROGRAMMING THE PREFIX 35
13.7 TELEPHONE RESET 36
13.8 CALLER ID DISPLAY CONFIGURATION (NUMBER, NAME, OFF) 36
13.9 USER TO USER SIGNALLING (UUS) 37
13.9.1 Programming UUS Messages 37
13.10 LEAST COST ROUTING (LCR FUNCTION) 37
14 DATA INTERFACE 39
14.1 CONFIGURATION OVERVIEW 39
14.2 ESTABLISHING INTERNET CONNECTION (WIN95
®
; WIN98
®
)39
14.2.1 Installing Modem driver into Windows 39
14.2.2 Setting Dial-Up Network 39
14.2.3 Setting Internet Protocol 40
14.2.4 Establishing Connenction witn Internet provider via Dial-Up Network 40
14.3 CTI SOFTWARE INSTALLATION 41
14.4 PC TELEPHONY WITH THE DESKMASTER PC SOFTWARE 41
14.4.1 Functions of the Deskmaster PC Application 41
14.5 DATA ACCESS WITH MODEM COMMANDS 42
15 DESKMASTER 520I ANALOG INTERFACE 42
15.1 CONFIGURATION OVERVIEW 43
15.2 TRANSFER CALL FROM ISDN PHONE TO ANALOGUE PHONE 43
15.3 KEYPAD COMMANDS ON ANALOGUE PORT 43
15.4 FLASH COMMANDS ON ANALOGUE PORT 44
15.5 MSN FOR THE ANALOG PORT 44
15.6 SELECTING THE ISDN CALL TYPE ON THE ANALOG EXTENSION 44
16 TROUBLESHOOTER 45
17 APPENDIX 46
17.1 MODEM COMMANDS (AT COMMANDS) 46
17.1.1 Basic Commands 46
17.1.2 '&' Commands 46
17.1.3 '*' Commands (Special Deskmaster Control Commands) 47
17.2 RESULT CODES 47
17.2.1 Data Codes 47
17.2.2 Voice Codes 48
17.2.3 Register 48
17.2.4 External Interfaces (Microsoft TAPI, CAPI, DDE and ODBC) 49
18 ERROR MESSAGES/CAUSES 49
19 QUICK OPERATION GUIDE 51
HL_DM5201_GB.qxd 16-04-2003 13:24 Page 4