Filter
Top Products
Please note, that Call Forwarding has to be enabled in the ISDN Exchange. In addition, the own MSN
number has to be programmed for your phone.
(See section Programming – Programming Multiple Subscriber Numbers (MSN)).
9.1.1 Call Forwarding Enabled/Disabled
• Idle State.
• Go to the menu item diversion.
(Function code “220”
will be displayed optionally.)
• Select the diversion required, using the
arrow keys : diversion to; delayed; on busy
9.1.2 Enter/Change Call Forwarding Destination
• Enter new destination for diversion.
• Select the right MSN number.
This menu is obsolete, if only one MSN
has been programmed.
• Display indicates temporarily that the
configuration was successful.
• The LED for the “INFO” key will start flashing.
9.2 Phone Barring
You can protect your telephone against unauthorised usage by means of 4 different levels of barring
outgoing public calls. You can chose between the following barring options:
Total •Your phone will be locked for all outgoing calls.
National • Only local calls will be allowed.
International • Only countrywide calls will be allowed.
Barring OFF • There are no restrictions.
Note : The phone has 3 programmable emergency numbers, which may be dialed at any time and regardless of the set bar-
ring options. By default, the emergency numbers 110 and 112 are programmed. The emergency numbers are available from
the system parameter menu.
20
Deskmaster
Mo. 21 Feb 99 17:26
220 Diversion
Typ of div. :
Diversion to
Number to
0711839262
Terminal addr.
MSN : 0 …
Mo. 21 Feb 99 17:26
Diversion ON
HL_DM5201_GB.qxd 16-04-2003 13:24 Page 20