Filter
Top Products
Note: Baby call function can not be used in handsfree mode.
7.5. Alarm tones
You can select if you want to hear a tone when you push a button, when the battery is empty (every
30 seconds) and when you are out of range (every 10 seconds) when the handset is to far away from
the base station).
When you have enabled a setting, ✔ is displayed.
- Press MENU when the unit is in standby mode..
- Select CONFIG HS by using the UP- and DOWN keys.
- Press OK to confirm.
- Select TONES by using the UP- and DOWN keys.
- Press OK to confirm.
- Select the desired Alarm Tone by using the UP- and DOWN keys.
(KEY CLICK – BATT.LOW– RANGE ALA)
- Press OK to enable/disable the selected setting.
- The display shows ✔ (ENABLED) OR – (DISABLED)
- Press ESC to leave the setting.
7.6. Handset name
The name of the handset will be displayed in standby mode. If you want to enter or change this name:
- Press MENU when the unit is in standby mode..
- Select CONFIG HS by using the UP- and DOWN keys.
- Press OK to confirm.
- Select USER NAME by using the UP- and DOWN keys.
- Press OK to confirm.
- Enter the name by means of the alphanumerical keypad (see 5.1)
- Press OK to confirm.
- Press ESC to leave the setting.
7.7. Keypad Lock with Pin Code
This setting protects your handset against unwanted use.
- Press MENU when the unit is in standby mode..
- Select SECURITY HS by using the UP- and DOWN keys.
- Press OK to confirm.
- Select KEY LOCK by using the UP- and DOWN keys.
- Press OK to confirm.
- Enter the Pin code of the Handset: H_S PIN? (DEFAULT PIN = 0000)
- Press OK to confirm.
- The display shows PIN LOCK
To deactivate the setting:
- Press OPT. when the unit is in standby mode..
- Select UNLOCK by using the UP- and DOWN keys.
- Press OK to confirm.
- Enter the Pin code of the Handset: HS_PIN?
- Press OK to confirm.
7.8. Change PIN Code
The standard Pin code is 0000
To change the Pin code:
- Press MENU when the unit is in standby mode..
- Select SECURITY HS by using the UP- and DOWN keys.
80
Butler 5070