Filter
Top Products
Butler 5020
- Press OK to confirm.
- Press ESC to leave the setting.
6.3. External call restriction
6.3.1.
Pin code call
This setting allows you to define, which handsets can only make external calls by entering a pin code
before each call.
- Press MENU when the unit is in standby mode. .
- Select BASE SETTING by using the UP and DOWN keys.
- Press OK to confirm.
- Select ACCESS by using the UP and DOWN keys.
- Press OK to confirm.
- Select PIN CALL by using the UP and DOWN keys.
- Press OK to confirm.
- Select the handset that need to enter the Pin-code before each outgoing call. Example (- 2 - - - ),
handset 2 is set for Pin code call.
- Press OK to confirm.
- Enter the base Pin code : BS_PIN?
- Press ESC to leave the setting.
To disable the setting follow the same instructions.
6.3.2. Selective call restriction
You can restrict specific numbers to be dialled or restrict telephone numbers starting with certain digits.
- Press MENU when the unit is in standby mode. .
- Select BASE SETTING by using the UP and DOWN keys.
- Press OK to confirm.
- Select ACCESS by using the UP and DOWN keys.
- Press OK to confirm.
- Select BLOCKADGE by using the UP and DOWN keys.
- Press OK to confirm.
- Select for which handset you want to enter the restriction.
- Press OK to confirm.
- Enter the telephone number or the beginning of a number, you want to block.
Ex. If you enter 00, no international calls are possible.
You are able to enter maximum 12 digits.
If you want to enter more than one number , press the R button between numbers.
R will also be stored as one digit.
Ex. If you enter 00R019, every external outgoing call starting with 019 or 00 are blocked.
- Press OK to confirm.
- Press ESC to leave the setting.
To disable the setting follow the same instructions and erase the stored digits.
6.4. Reset Base
The default settings are :
Base Pin: 0000
Call restriction: Empty
Network operator prefix: Empty
60
Handl. B5020 euro 18/3/02 12:11 pm Page 60