Filter
Top Products
54
Butler 5020
- Press OK to confirm, the selected name and/or number is displayed again.
- Press OK to re-confirm and go back to the Phonebook.
- Press ESC to leave the phonebook.
4.7. Erasing all numbers and name from the Phonebook
- Press the PHONEBOOK button when the unit is in standby mode..
- Press OPT.
- Select DELETE ALL by using the UP and DOWN keys.
- Press OK to confirm, the display will indicate SURE?
- Press OK to re-confirm. EMPTY appears on the display or press ESC if you don’t want to erase all
entries.
- Press ESC to leave the phonebook.
4.8. Speed dial numbers
10 speed dial numbers can be assigned to a stored number in the Phonebook. A phonebook number
will be stored under a number key.
4.8.1. Store speed dial number
- Press the PHONEBOOK button when the unit is in standby mode..
- Select entry to store as speed dial number via up and down keys.
- Press OPT.
- Select SPEED DIAL and press OK.
- Select NEW and press OK.
- You now get an overview of the free speed dial keys: #: ----------.
- Press a number key where to store this phonebook number (example key: 5 #: ----5----).
- Press the OK key to confirm.
- Press ESC to leave the phonebook.
The speed dial number will appear in front of the telephone number in the Phonebook.
4.8.2. Recall speed dial number
- Press and hold the numeric key for 3 sec where you stored the speed dial number.
- The stored number will be displayed.
- Press the LINE key to dial this number.
5. HANDSET SETTINGS
5.1. Keypad Lock
- Press MENU when the unit is in standby mode..
- Select KEY LOCK by using the UP and DOWN keys.
- Press OK to confirm.
The display shows DIAL 080. The keypad is now locked.
After dialing 080,the keypad will be released.
5.2. Ringer volume
- Press MENU when the unit is in standby mode..
- Select RING SIGNAL by using the UP and DOWN keys.
- Press OK to confirm.
Handl. B5020 euro 18/3/02 12:11 pm Page 54