Filter
Top Products
Topcom Butler 3970/Twin/Triple/Quattro 25
Topcom Butler 3970/Twin/Triple/Quattro
ENGLISH
9.5 Walkie Talkie function
With the walkie talkie function you can communicate between 2 handsets without being
registered or using the base.
To make walkie talkie calls you have to bring the handsets in the same group ID. All handset
with the same group ID can call each other and can be called
9.5.1 Walkie talkie modus ON/OFF
•Press MENU then scroll with the Up/down key to Function menu and press OK.
•Select Walkie Talkie menu.
•Select Enable to set the walkie talkie mode or Disable to leave it.
• When enabling it you have to enter the 4 digit group ID (for example ‘1234’). Enter the
group ID and press OK.
• Enter the walkie talkie ID (1-9) and press OK.
• Press to return to standby.
9.5.2 Making a walkie talkie call
When you have enabled the walkie talkie mode as above, the idle screen will show
‘Walkietalkiemo’.
• Press or INT followed by the walkie talkie ID number (1-9). The other handset will
start to ring. On the ring handset you can see which handset is calling (WT ID marked in
red).
• Press on the ring handset and start speaking. To stop press .
10 Extra’s
10.1 Calculator
You can enter the calculator by the menu or by pressing the calculator key .
•Press MENU then scroll with the Up/down key to Function menu and press OK.
Select Calculator menu.
OR
• Press the calculator key in idle mode.
• Enter the digits and press ‘#’ for a radix point and ‘*’-key to switch between positive or
negative. Press the Up-key to select between adding(+), subtracting(-), division(/)
and multiplication(*).
• Press the down-key as a delete key.
• Press the left menu key to see the result and to leave the calculator.