Filter
Top Products
20 Topcom Butler 3970/Twin/Triple/Quattro
Topcom Butler 3970/Twin/Triple/Quattro
•Press MENU then scroll with the Up/down key to Handset settings menu and press
OK.
•Scroll to Outgoing CallBar and press OK.
• Enter the Pin code (‘0000’)
• Select the desired barring type with the Up/down key and press OK. When Precall is
selected, the handset will ask to enter the 5 digit number and press OK to confirm.
• Press to return to standby.
7.10 Key beep ON/OFF
•Press MENU then scroll with the Up/down key to Handset settings menu and press
OK.
•Scroll to Key Tone and press OK.
•Select Key tone ON/OFF OK.
• Press to return to standby.
7.11 Message waiting settings (Phonemail service)
When you have phonemail* (or voicemail*) on your telephone line offered by the network
operator and there is a new message waiting, the network can send a message waiting
indication by the callerID information. The -icon appears on the top of the screen*. To hear
your voice messages you have to dial the voice mail number. When all messages are heard,
the network will send a message waiting off-signal and the -icon will disappear. If the
network doesn’t send this message waiting off-signal, you can manually remove the icon
from the screen (see below).
You can also program the voice mail service number so that you just have to press and hold
the ‘*’ key in standby to dial the voice mail service number.
7.11.1 You can manually remove this
-icon from the screen by:
•Press MENU then scroll with the Up/down key to Handset settings menu and press
OK.
•Scroll to Message waiting and press OK.
•Select Clear message and press OK.
• Press to return to standby.
7.11.2 Setting the voice mail service number
•Press MENU then scroll with the Up/down key to Handset settings menu and press
OK.
•Scroll to Message waiting and press OK.
•Select Service and press OK.
• Enter the voice mail service number you have to dial to hear your voice mails
• Press to return to standby.
* If the Phonemail service is available on the telephone line