Filter
Top Products
DASCCT_AIC23 Start-Up
4-4
4.2 DASCCT_AIC23 Start-Up
1) Execute the software file named DASCCT_AIC23.exe from the directory
where the software was loaded.
2) Click the Master or Slave radio button to select the operating mode.
3) Click the AIC 23 or DAC 23 radio button to select the device.
4.3 DASCCT_AIC23 Overview
The EQ GUI was designed with a screen resolution of 1152 by 864. Therefore,
the windows optimally fit on the screen using this resolution. For a screen
resolution of 800 by 600, the main window initializes higher up, toward the
center of the screen. All other resolutions initialize at the same coordinates as
designed in the 1152 by 864 screen resolution.
4.4 Main Panel
The GUI main panel is shown in Figure 4–2. The following paragraphs
describe the features seen on the main panel.
Figure 4–2. Main Panel
4.4.1 About Button
The About button is hidden under the TI logo in the upper left corner of the main
panel. Pressing this button causes a standard About box to appear with
release information about DASCCT_AIC23.
4.4.2 AIC 23 and DAC 23 Radio Buttons
These radio button allow selection of the device to be emulated by the
TLV320AIC23 EVM2, the codec or the DAC.
4.4.3 Master and Slave Radio Buttons
These radio buttons select the operating mode of the device.