Telular SX6P-300G Telephone User Manual


 
SUPPLEMENTARY
SER
VICES (NETWORK DEPENDENT)
In-Call Options
The following options are available during a call. While in a call, press the MENU key to access
these options. Options display based on call status. For example, Retrieve will only display if a
call is on hold or if Call Waiting indicates a second incoming call.
Hold: Puts active call on hold.
Retrieve: Activates a call that is on hold.
Swap: Swaps between held call and active call.
End Current: Ends the current call.
Multiparty: Displays options for managing multiparty calls.
Main Menu: Allows access to the Phonebook, Messages, or Call Log features.
Call Divert (Forwarding)
Call Divert sends incoming calls to another telephone number, even when the SX6P is turned off.
Call Divert options include all calls, calls that come in when the line is busy, calls that are not
answered after a specified number of seconds, or calls that come in when the SX6P is powered off
or has lost the network signal (Not Found). Certain types of calls can be diverted, such as voice,
data, fax, or text messages. Contact your service provider to activate the Call Divert feature.
Turn On Call Divert
1. Press the MENU key.
2. Select Call Divert.
3. Select the desired divert type (All Calls, When Busy, No Answer, Not Found).
4. Select On to divert all types of calls. To specify which types of calls to divert, select By Service,
highlight the desired service to divert, then press the SELECT key.
5. Enter the number to which calls will be diverted, then press the OK key.
HINT: Pressing the OK key before entering a number will display the Phonebook. Select a number,
then press the OK key.
Turn Off Call Divert
1. Press the MENU key.
2. Select Call Divert.
3. Select the desired divert type (All Calls, When Busy, No Answer, Not Found).
4. Select Off.
Cancel All Diverts
1. Press the MENU key.
2. Select Call Divert then Cancel All Diverts.
NOTE: When selected, all diverts will be canceled by the network.
Phonecell
®
SX6P GSM 20 User Manual