Filter
Top Products
Phonecell
®
SX6P GSM 4 User Manual
Figure 11 –
SX6P AC power connection.
AC Power Cord
Wall Socket
Power Supply
AC Power
Input
Barrel
Connector
Connect the SX6P to AC Power
1. Connect the barrel connector of the power supply to the AC power input on the rear panel of
the SX6P - see Figure 11.
2. Plug the AC power cord into the power supply.
3. Plug the AC power cord into the wall socket.
4. Press and hold the ON/OFF button for 3 to 5 seconds.
5. Check the cellular signal strength and move the unit until the best signal possible is
achieved - see the Service Indication section of this manual.