Filter
Top Products
1. On/Off Switch – Turns the power on/off to the base
station.
2. Power / Low Battery Light – Indicates the base
station has power, either from the internal battery or
external power connected to the unit.
Battery Indication:
• GREEN - Battery OK
• RED - Battery Low (needs charged)
3. Transmit Antenna Jack – This reverse TNC jack is
where the transmit antenna coaxial cable should be
connected.
4. AP Active Light – This green light flashing indicates
that the AP has successfully booted and is operating.
5.
Gooseneck Antenna Mount Lug - Provides
attachment point for the gooseneck antenna mount.
6. RF Channel Display – Indicates the RF channel the
unit is set on.
7. Receive Antenna Jack – This reverse TNC jack is
where the receive antenna coaxial cable should be
connected.
8. Select Button – Press the button to select the desired
RF channel for the base station.
• ClearScan – Press and hold the button until the
decimal point starts to flash (about 3 seconds)
then release. The unit will examine the RF
channels available, then select the one with the
least activity and set the AP on that channel.
• Lock – Press and hold the button until the
decimal point is on solid (about 10 seconds)
then release. The AP will be locked on the
channel displayed. To unlock, press and hold
the button again until the decimal point is off.
Lock makes the currently displayed channel
difficult for a user to accidentally change.
9. Charge Jack – Used to charge the internal battery or
power the unit directly off a wall outlet. Accepts a
5.5mm x 2.5mm plug with the center positive. Must be
supplied with a 12VDC regulated power supply with at
least a 400mA current capacity.
10.
Charge Light.
• RED = Battery is charging.
• GREEN = Battery is charged.
11.
Programming Jack – This RJ-45 jack is used for
programming the unit at the factory.
ON
OFF
RECEIVE
ANTENNA
POWER
LOW
BATTERY
AP
ACTIVE
CHANNEL
TRANSMIT
ANTENNA
SELECT
CHANNEL
CLEAR SCAN
LOCK
XO-AP
Telex
1
3
2 4
5
6
7
8
Section 2 - XO-AP Base Station
Controls and Connections
2-1
CORD
RETAINER
12 VDC
400mA
RED: CHARGING
GREEN: READY
PGM
9
10
11
Front View
Rear View