Filter
Top Products
To resume the call, press the HOLD key or SPEAKER key. This will remove the call
from hold and make the call active.
8.10 USING MUTE
To temporarily switch off the microphone of either the speakerphone or handset,
press MUTE. The MUTE indicator lights and the microphone turns off, but you can
still hear person on the other end of your conversation. Press MUTE again to resume
your conversation.
8.11 STORING A NUMBER IN MEMORY
Follow these steps to program up to ten memory locations, for one touch access to
frequently dialed numbers or special PBX/Centrex services or features. Each memory
location can store up to sixteen (16) digits.
1) Lift the handset, then press PGM.
2) Enter the telephone number or string of digits you wish to store. Once you
have entered the entire number or string, press the memory button corre
sponding to the location where you would like the number stored.
8.12 DIALING A STORED NUMBER
Lift the handset or press the SPEAKER key, then press the desired memory key. The
telephone will automatically dial the stored number.
9. CALLER ID
Caller ID is a service provided by your telephone company or service provider. When
you subscribe to this service, the telephone company sends the incoming caller’s tele-
phone number (and name, if available), and the call’s date and time, between the first
and second rings. The CID display receives and displays this information for each
call, and updates the display with the current date and time. The display also shows
if the caller information is not available, or if the sender blocks that information.
Your B120D will save up to sixty (60) call records, after which it replaces the
oldest call record with each new one.
9.1 REVIEWING CALLER ID RECORDS
Each time you receive a call, your B120D stores a Caller ID record that you can
review later. A Caller ID record includes:
– Call number (in the order the calls are received)
– The time and date of the call
– Caller’s telephone number (if available)
– Caller’s name (if available)
To review all the Caller ID records, press REVIEW or REVIEW .
NOTES: The display shows up to twelve (12) digits of a phone number. If an incoming phone
number is longer,the display shows only the last 12 digits.
The B120D returns to the time and date display after about fifteen (15) seconds, if
you do not press a key during that time.
The number of new calls and the number of total calls received is also displayed.
7