Filter
Top Products
7.1 RING CADENCES
Your phone has three ring cadences, or patterns. To change the cadence, slide the
switch located along the right hand side of the telephone to one of the musical notes
icons located beneath the switch (please refer to Figure 7.)
8. OPERATION
8.1 PLACING AND ANSWERING CALLS USING THE HANDSET
To make a call, pick up the handset. When you hear the dial tone, dial the desired
number. To answer an incoming call, pick up the handset or press the SPEAKER key.
To end a call, place the handset back on the cradle or press the SPEAKER key again.
8.2 HANDSET VOLUME CONTROL
There are three (3) volume levels for the handset volume. To increase or decrease the
handset volume, press the VOLUME UP or DOWN keys.
8.3 USING THE SPEAKERPHONE
To place or answer a call using the speakerphone, press the SPEAKER key. The
SPEAKER indicator will light and the phone will go off hook.
To end a speakerphone call, press the SPEAKER key again. The SPEAKER indicator
light turns off.
8.4 SWITCHING BETWEEN HANDSET AND SPEAKERPHONE
To switch from the handset to the speakerphone during a call, press the SPEAKER
key, and place the handset on the base.
To switch from the speakerphone to the handset, lift the handset and the
speakerphone will automatically turn off.
8.5 ADJUSTING THE SPEAKERPHONE VOLUME
There are three (3) volume levels for the speakerphone. To increase or decrease the
speakerphone volume level, press the VOLUME UP or DOWN keys.
8.6 USING A HEADSET
Plug a standard 2.5 mm headset plug into the headset jack on the right hand side of
the telephone. You may place and receive calls by pressing the SPEAKER key.
8.7 USING REDIAL
The redial function allows you to redial the number that was last dialed. Pick up the
handset, or press the SPEAKER button, and press the REDIAL key. The number will
be dialed automatically.
8.8 USING FLASH
The FLASH key supports feature such as call waiting. For example, if you have
subscribed to call waiting, press FLASH to answer an incoming call without
disconnecting the current call. Press FLASH again to return to the first call.
8.9 USING HOLD
To place a call on hold, press the HOLD key. The HOLD indicator flashes. You can
now hang up the handset without disconnecting the call.
6