Filter
Top Products
11
USER GUIDE
Receiving Calls
When you receive a call on your mobile phone, you will hear the mobile phone ring before you hear the
ring tone through your headset as there is a small delay before the headset recognizes the incoming call.
If you do not wish to answer the call, you can use the Call Reject feature to reject the call and send the
caller to voice mail (if available).
If the Call Waiting feature is supported by your phone, you can answer an incoming call while you are
connected on another call. In this case, the connected call is placed on hold and the incoming call is
connected. While both calls are connected, you can toggle between both.
To Receive a Call
1. When you hear ring tone on your headset, or see “Ring” and the caller ID in the display, press the
headset TALK button. The call is automatically connected to your headset and “Answered” appears in
the display.
To Reject an Incoming Call (if supported by your mobile phone)
1. When you hear ring tone on your headset or see “Ring” in the display, press and hold the TALK
button for three seconds until you hear the call reject tone.
The call will be sent to voice mail and will
no longer ring on the headset.
To Receive a Call Waiting Call (if supported by your mobile phone)
1. When you hear call waiting tone while on a call, press and hold the VOLUME DOWN button for three
seconds. The first call will be placed on hold, and the second call is connected.
2. To switch between the calls, press and hold the VOLUME DOWN button again. The current call will be
placed on hold, and the other call is connected.
NOTE: For some mobile phones, you must configure the phone to answer calls directly on your
Bluetooth headset. Refer to the mobile phone user guide for instructions for initiating this feature.