Filter
Top Products
Operational Difficulty
What to Check
Cordless Telephone
Doesn't ring
SPIRIT
customized ringing and line-use options*
Receiver out of range
Low batteries in cordless phone
Ringing switch on cordless phone not on
Can't return to OFF mode
Re-extend antenna then return phone to OFF
mode before collapsing antenna
Move closer to the cordless base station (conver-
sation range may be greater than on/off range)
Calls are noisy or have static
Cordless telephones are subject to the same
interferences when connected via the ConnecT/R
as when connected to a normal telephone line.
Poor call quality can be improved by moving
toward the base station. You may be able to
improve the general transmission quality by
moving the location of the cordless base station
or by changing the electrical outlets used by the
base. Environments with large amounts of metal
in the building structure will generally limit the
use of cordless phones.
Make sure the ConnecT/R's transformer is at
least three feet from the controller.
* Check with the person in your organization responsible for the
SPIRIT
System.
21