Filter
Top Products
22
Advanced Features
Phonebook Edit Entry Options
Speed-Dial
The NetLink 8000 Series Wireless Telephone can assign up to 10
speed-dial keys to numbers entered into the phonebook.
Open the speed-dial list by pressing the
Spdl softkey from standby
mode. If programmed, the first item on this list is the system-wide
speed-dial number set by the system administrator. It is specially
marked with a greater-than symbol (>) on the left side of the row.
It is usually reserved for emergency situations.
To make a speed-dial call, press and hold the corresponding key for
one second. The system speed-dial key must be pressed for three
seconds. The handset will display the name and number for one
second before the call is dialed. You may press
END during this sec-
ond to terminate the call.
You may also use the
Nav keys to highlight a number or listing and
then press
START or the Spkr softkey to dial the number. The Exit
softkey returns you to the standby mode.
A phonebook entry may be assigned to a speed-dial key from the
speed-dial list. Select the speed-dial key that you wish to assign and
If you want to Then
Dial number Press
START or the Spkr softkey.
Assign a speed-dial
number to this entry
Press the
Spdl softkey. Use the Nav keys
to highlight an empty slot and then press
NavOK.
Edit an entry Press the
Edit softkey to open the enter
number display and edit the existing
number.
Return to
phonebook list
Press the
Back softkey or NavOK.