Filter
Top Products
SpectraLink Corporation NetLink e340/h340/i640 Wireless Telephones and Accessories User Guide
Part Number: 72-1004-01-F.doc Page 42
Appendix C: MGCP Protocol
Overview
With the MGCP protocol, only Mute and Hold are preprogrammed
to a fixed series of key presses. All other all feature programming is
done in the Call Agent, the programmable component of the
MGCP system. The programmed features may be displayed on the
handset through the
LINE, FCN and MENU keys as described below.
Contact your system administrator for additional information about
the exact features available in your facility.
Feature Access
Mute
The Mute feature is assigned to
FCN 0. To mute the microphone,
press
FCN and then press the 0 (zero) key.
Hold
The Hold feature is assigned to
FCN *. To put a call on hold, press
FCN and then press the * (asterisk) key.
Line appearances,
Line features
The handset supports up to nine line appearances and features
programmed to the
LINE key. To view the key labels for line
appearances and line features, press
Start Call to go off hook, and
then press the
LINE key. Press the LINE key again to display the
second page of the list if more than four line keys have been
programmed. To activate, press the corresponding number key.
You may also use the
Up, Down, and Select buttons to scroll
through the displays and activate the features or lines on this list.
Press the
End Call key to exit the Line Appearance list.
Feature list
The handset supports up to nine features programmed to the
FCN
key. When
FCN is pressed, the display lists the features and the
assigned key. Pressing
FCN again will display the second screen.
Activate the features on the off-hook handset by pressing
FCN +
the assigned number key. You may also use the
Up, Down and
Select buttons to scroll through the screens and activate the
features on this list. Press the
End Call key to exit the list.
Softkeys
The handset can display four softkey labels on the bottom row of
the display. These are activated by pressing the corresponding
softkey. The complete description of the softkey labels as
programmed in the Call Agent may be displayed by pressing the
MENU key while off-hook. You may use the Up, Down, and Select
buttons to scroll through and activate the features on this list. Each
item on this list also has a number key assigned to it. Pressing the
number key is another way to activate the feature. Press the
End Call
key to exit the list.