Filter
Top Products
SpectraLink Corporation NetLink e340/h340/i640 Wireless Telephones and Accessories User Guide
Part Number: 72-1004-01-F.doc Page 27
Battery Packs
Overview
The handset will need to have its Battery Pack recharged
periodically. The Nickel Metal Hydride (NiMH) rechargeable
handset Battery Pack gives you four hours of talk time or 80 hours
of stand-by time (unless PTT is enabled in the NetLink i640
Wireless Telephone only). Stand-by time is when the handset is
turned on, but not in an active call.
Indications of low battery
The handset will notify you when the charge on the Battery Pack is
low by displaying the battery icon. If you are in a call you will hear a
soft beep through the earpiece every thirty seconds. User has 15–30
minutes of battery life left. The alerts will increase to every six
seconds when there is about one minute of battery life left.
Not in call: The message Low Battery and a loud beep indicate a
critically low Battery Pack charge. These occur when the user is not
in a call. The handset will not work until the Battery Pack is
charged.
Caution:
Take care not to short the battery contacts on the Battery Pack with
metal objects such as coins, keys or paper clips. Shorting the
contacts can cause permanent damage.
NetLink e340, h340 Battery
Pack removal and replacement
To remove, press down on the latch on the Battery Pack on the
back of the handset. The Battery Pack releases outward.
To replace, slide the lip of the Battery Pack into the bottom of the
cavity. Push the top of the Battery Pack until it snaps into place.
You should not have to force it against the handset.
NetLink i640
Battery Pack removal and
replacement
To remove, hold the handset in one hand with the keypad facing
up. Press both Battery Pack release buttons (on the left and right
sides of the handset) at the same time. The Battery Pack will release
downward. You may catch it with the palm of your other hand. If
the Battery Pack does not release, gently shake the handset while
pressing both release buttons. Do not pry.
To replace, slide the Battery Pack straight into the cavity until it
snaps into place. You should not have to force it against the
handset.
Changing the Battery Pack while
in a call
If you are using the NetLink Telephony Gateway, the Battery Pack
may be changed while the call is still in progress. Do not press
End
Call
on the handset. Quickly remove the discharged Battery Pack
and replace with a charged Battery Pack, then press
Power On to
turn the handset back on. Press
Start Call to resume the call in
progress.
Battery Pack note
Battery Packs are not interchangeable. The NetLink i640 Wireless
Telephone uses the distinctive square model BPX100 Battery Pack.
The Battery Packs for the NetLink e340 and h340 Wireless
Telephones are the same rounded shape but different colors. The
NetLink e340 model BPE100 Battery Pack is black; the NetLink
h340 model BPN100 Battery Pack is steel blue.