Filter
Top Products
SpectraLink Corporation NetLink e340/h340/i640 Wireless Telephones and Accessories User Guide
Part Number: 72-1004-01-F.doc Page 41
Feature activation
1. Press the
Start Call button followed by the MENU key. The
Pre-dial labels and corresponding shortcut codes are
displayed.
2. Navigate the list using the side
Up and Down buttons. The
list is circular. Alternatively, the
MENU button may be
pressed repeatedly to display the next set of four options.
3. Select the feature by pressing the
OK soft key. Alternatively,
press the
Select button or dial the shortcut, if available. The
handset then sends the programmed codes to the PBX.
4. The
Exit soft key or End Call key can be used to terminate
prior to making a feature selection.
5. There is a ten second timeout which will return the handset
to the previous state if no additional keys are pressed while
in either Pre-dial menu or pre-dial mode.
6. The PBX could automatically release the call in some cases.
In this case the handset returns to the Standby mode.
7. There is a ten second timeout which will return the handset
to the previous state if no additional keys are pressed while
in the Post-dial menu.