Filter
Top Products
AM
AM
NEW
CALL#
AM
NEW
CALL#
If the name and number are not available due to
the caller’s restriction, the LCD shows ‘-PRIVATE
CALL-’ with the time and date received. The
‘NEW’ icon turns on and New Call LED blinks.
If the name and number are not available, the LCD
will show ‘-UNAVAILABLE-’ with the call’s time
and date. The ‘NEW’ icon turns on and New Call
LED blinks.
If no key is pressed within 20 seconds, the LCD
will show the ‘Answer-Ready’ mode, and display
the total call counter, new call counter, current time
and date.
REVIEWING CALL RECORDS
If you have new calls (‘NEW’ icon and New Call LED is lit). Press or
button to read all of the most recent calls. The CALL# will decrease.
Once all the new calls have been read, ‘END OF NEW CALL’ will be
displayed.
Press button to view the oldest calls, or press button to view the
most recent calls.
After you view all the call in memory, the LCD will show ‘END OF
LIST’.
NOTES:
1. The New Call LED will blink until all the new Caller ID data has been
reviewed.
2. If the ‘RPT’ icon is turned on, you have received multiple NEW calls
from the same number.
3. If you receive a call from a number stored in (previously reviewed)
memory, the data in memory will be replaced with the new call’s time
and date and the ‘NEW’ icon will be turned on.
If no key is pressed within 20 seconds, the LCD will show the ‘Answer-
Ready’ mode, and display the total call counter, new call counter, current
time and date.
TO ERASE CALLER ID RECORD
Press or button for the Caller ID memory location to be reviewed. To
clear a single Caller ID memory location, press ERASE button twice
quickly.
The data for that call will be erased, and the CALL# and Caller ID
information will be updated.
After all new message have been reviewed, press and hold ERASE button
for 3 seconds. The message ‘ERASE ALL CALLS’ will appear to confirm
your action. Press ERASE button to clear all the information, then the
message ‘NO CALLS’ will appear.
Both the total call and new call counters will become zero, and the current
time and date will be displayed.
NOTE: All new calls must be reviewed before clearing the entire memory.
CALLER ID REDIAL
With the handset hung up on the base press or button to find the
Caller ID memory location to be redialed.
Press REDIAL button twice to redial, the LCD shows ‘LIFT HANDSET’
or ‘PICK UP CALL’.
Pick up the handset to make your phone call.
With the handset off hook, press or button to find the Caller ID
memory location to be redialed. Press REDIAL button twice, the number
will then be dialed automatically.
When the Caller’s Phone Number has a Different Area Code from
the Preset:
The long distance dialing digit ‘1’ will be inserted automatically during
Caller ID memory call back.
Press REDIAL button, 11 digits number will blink. Press REDIAL button
again to confirm to dial the 11 digits number.
When the Caller’s Phone Number has the Same Area Code as the
Preset:
The long distance dialing digit ‘1’ and the 3 digits area code will be
deleted automatically during Caller ID memory call back.
Press REDIAL button, 7 digits number will blink. Press REDIAL button
again to confirm to dial the 7 digits number.
NOTE: Your telephone company may require a different format for
making out-of-area (toll) calls WITHIN your area code. See the next
section for the procedure to obtain the applicable toll-call format for
your phone company.
When your telephone company requires you to dial other than a 7-
digit number (same area code) or 11-digit number (different area
code) to make toll calls within your area code, follow one of the 4
options below for Caller ID call back.
Option 1 : 1+Area Code+7-Digit Number (11 digits)
Option 2 : 1+7-Digit Number (8 digits)
Option 3 : Area Code+7-Digit Number (10 digits)
Option 4 : 7-Digit Number Only.
Follow the procedure below to select one of the above options for
Caller ID call back.
With the handset hung up on the base.
1 Press or button to find the Caller ID memory location to redial.
Press REDIAL button, the 7-digit number (if same area code) or 11-
digit number (if different area code) will blink.
2. Press or button to select one of the options.
3. Press REDIAL button again to confirm the dial.
— 16 — — 17 — — 18 —
CALLER ID OPERATION CALLER ID OPERATION CALLER ID OPERATION