Filter
Top Products
AM
REDIAL BUTTON
Automatically redials last number called (up to 32 digits). If the number
was busy or unanswered:
1. Lift the HANDSET.
2. Press REDIAL button.
MUTE
Prevent sound from your room from being heard by another party on the
phone.
Press and hold the MUTE button as long as you want this feature activated.
RESET
At the end of a call, you can make your next call without replacing the
HANDSET in the cradle. Press and hold RESET button to disconnect
the telephone.
LIGHTED KEYPAD
For better visibility when dialing in a dim light, a lighted dial pad is
provided.
MEMORY DIALING
Your FM2552PX is equipped with 13 memories (three priority, ten two
touch) for programming your most frequently dialed telephone numbers.
You can store up to 16 digits in each priority key (M1, M2, M3) or in
each of the numeric keys 0 through 9 by following the steps outlined.
Numbers must be stored with the handset lifted.
NOTES:
• Your local phone company restricts the time you can have the handset
off the base (off-hook).
• You should program the FM2552PX memory with the line cord
unplugged from the wall, if you are going to program more than one
phone number.
TO PROGRAM PRIORITY KEYS
1. Lift the handset.
2. Press the STORE button.
3. Press the keypad to enter the number that you want to program. The
LCD on the back of the handset confirms the numbers you entered.
4. Press STORE button. The ‘MEM’ will be displayed on the right corner
of LCD.
5. Press M1, M2 or M3 button.
6. Return the handset to the CRADLE.
TO PROGRAM FREQUENTLY CALLED NUMBERS
1. Lift the handset.
2. Press the STORE button.
3. Press the keypad to enter the number that you want to program. The
LCD on the back of the handset confirms the numbers you entered.
4. Press STORE button. The ‘MEM’ will be displayed on the right corner
of LCD.
5. Press the memory location (0 to 9) on the keypad.
COPY FROM THE CALLER ID TO TELEPHONE
MEMORY
Press or button until the Caller ID memory location to be copied
appears on the LCD. Press STORE button twice to enter memory store.
The ‘MEM’ will be displayed on the right corner.
Press the memory location (M1-M3 or 0-9). The LCD will then return to
the ‘Answer-Ready’ mode, and display the total call counter, new call
counter, current time and date.
If no key is pressed within 20 seconds, the LCD will return to ‘Answer-
Ready’ mode.
Repeat the above steps to store a different number in the same speed dial
location, or to store a new number in a different speed dial location.
NOTES:
• Pressing REDIAL button will place a 4-second PAUSE into the number.
Which may be required for accessing special phone services.
• You can store a number with up to 16 digits maximum. Only the last
14 digits will be displayed.
TO DIAL PRIORITY NUMBER
1. Lift the handset.
2. Press M1, M2 or M3.
3. Your call will automatically be dialed.
TO DIAL FREQUENTLY CALLED NUMBERS
1. Lift the handset.
2. Press the MEMORY button.
3. Press the desired memory location button (0 to 9).
4. Your call will automatically be dialed.
NOTE: Remember to plug the telephone line cord back into the wall.
CALLER ID OPERATION
NOTE: BATTERIES ARE REQUIRED FOR CALLER ID
OPERATION.
If an incorrect, invalid or incomplete Caller ID signal
is received, the LCD shows ‘-LINE ERROR-’.
If only the caller’s phone number is received, the
LCD shows the caller’s phone number with the time
and date it was received. The ‘NEW’ icon turns on
and New Call LED blinks.
— 13 — — 14 — — 15 —
TELEPHONE FEATURES MEMORY DIALING MEMORY DIALING