Filter
Top Products
Telephone Operation
Receiving a Call
1. When you hear your phone ring, lift the HANDSET.
After the second ring, the caller's name and telephone number will
display on the LCD if you have CID service. The NEW CALL LED
and the NEW CALL ICON will flash.
The caller ID information will be stored in the order received.
FLASH (CALL WAIT)* BUTTON
Allows you to access the Call Waiting service from your local
telephone company* or access a new dial tone.
*Requires special service from your local telephone company.
RINGER OFF/LO/HI SWITCH
When you don't want to be disturbed, set the switch (on bottom of
base) to "OFF". You can still make outgoing calls. When you feel the
ringer is too loud, set the switch to "LO".
2. At the end of your call, return the HANDSET to the CRADLE
NOTE: 1. If you pick up the telephone before the second ring is
completed, the Caller ID information may not display properly.
2. The information will be displayed on the LCD for 20 seconds.
3. If the received call information is the same as any of the new calls,
the unit displays "REPEAT" icon to indicate a REPEAT CALL.
Telephone Features
11 12
Telephone Features
LIGHTED KEYPAD
For better visibility when dialing in a dim light, a lighted dial pad is
provided.
RECEIVER VOLUME CONTROL
The RECEIVER VOLUME CONTROL is located on the side of your
handset. This control allows you to adjust your handset volume from
normal to high for a more comfortable listening level.
PAUSE
Whether you have Tone or Pulse service, you can insert a 4-second
PAUSE into the dialing or storing of a number into memory in order
to access custom and telebanking services, long distance, etc. Press
the PAUSE (REDIAL) button at the desired point in the number.
Press PAUSE (REDIAL) again if an additional 4 seconds is needed.
REDIAL BUTTON
Automatically redials last number called (up to 32 digits). If the
number was busy or unanswered:
a. Lift the HANDSET.
b. Press the REDIAL Button (on the keypad side of the handset).
MUTE BUTTON
Prevent another party on the phone from hearing your personal
discussion .
Press and hold the MUTE Button as long as you want this feature
activated.
RESET BUTTON
At the end of a call, you can make your next call without replacing the
HANDSET in the cradle. Press and hold RESET to disconnect the
telephone.
HEARING AID COMPATIBILITY
The FM2552/FM2000 is compatible with inductively coupled hearing
aids.
CALL TIMER
The call timer will appear on the display for you to track the
conversation time. It will disappear once you hang up.
Dialing a Call
1. Lift the HANDSET.
2. When you hear a dial tone, dial the number. The LCD display will
show the dialed number and the time that had elapsed during the call.
PM
NEW CALL
PM