Filter
Top Products
9
5. Remove the mounting bracket.
Rotate it so that the bottom of
the phone is flat. Reattach the
mounting bracket by inserting
the tabs into the slots on the top
of the unit first, and then
snapping the bottom tabs into
place.
6. Plug the short telephone line
cord into the jack marked TEL
LINE on the back of the unit and
plug the other end into a
modular wall jack.
7. Slip the mounting holes over
the wall plate posts and slide
the unit down firmly into place.
(Wall plate not included.)
8. Remove the handset hook; turn
it upside down, and put it back
in the slot. You need to do this
so the handset doesn’t fall out
of the base.
9. Raise the base antenna.
NOTE : The phone automatically
defaults to touch-tone dialing. To
change to pulse (rotary) dialing,
see “Tone/Pulse Dialing”. If you
don’t know which type of service
you have, check with the phone
company.
9
7
8
6
5
IN USE
VOICE MAIL
PAGE
IN USE
CHARGE