Southwestern Bell 26963 Cordless Telephone User Manual


 
31
Problem Solution
Handset does not ring Make sure the RINGER switch on the handset is turned
to ON.
You may have too many extension phones on your
line. Try unplugging some phones.
See solutions for No dial tone.
Cannot hear phone Press the VOLUME button to adjust the
conversation volume to the desired listening level.
You experience static, Change channels.
noise, or fading in and out Is handset out of range? Move closer to the base.
Does the base need to be relocated?
Charge handset battery.
Make sure base is not plugged into an outlet with
another household appliance.
Battery will not hold a Be sure you are sufficiently charging the battery.
charge
or
is fully charged When the battery has been charged for 12 hours,
and the phone displays you can expect approximately 6 hours of talk time.
RECHARGE
Check to be sure battery contacts on both the handset
and the base are making contact and are clean; free of
dirt or lint.
When the handset is placed in the base, check that the
base CHARGE light is on.
Replace battery.