Filter
Top Products
34
US
Answering Machine Features
Setting up the answering machine (continued)
Notes
• If you do not record your own greeting, the prerecorded greeting will be
assigned automatically (see page 35).
• If your greeting is less than two seconds, the greeting is not recorded. The
prerecorded greeting will be assigned automatically.
• If a call comes in during recording, recording stops automatically.
• If 90 seconds have passed or memory becomes full in step 3, recording stops
automatically.
• “Memory full” is announced if no recording space is available when you
press (REC/MEMO). Erase unnecessary messages (see page 40).
Tips
• To record the greeting from a touch-tone phone, see “Operating from an
outside phone” on page 46.
• Even if a power interruption occurs, your own greeting is not erased.
To check the greeting
Press (MENU) repeatedly until “Set greeting message” is announced.
“- -” appears on the display. Then press (PLAY/STOP) to play back the
greeting.
To change the greeting
Record a new greeting by following the instructions on the previous
page. The new greeting replaces the old one.
To erase the greeting
1 Press (MENU) repeatedly until “Set greeting message” is
announced. “- -” appears on the display.
2 Press (ERASE), and “Greeting message has been erased” is
announced.
To go back to the factory prerecorded greeting
Press (ERASE) while playing back the greeting.
This will bring back the original greeting, but your own greeting is
erased.
Notes
• You can also erase the greeting during playback.
• If you have erased your own greeting, the prerecorded greeting will be
assigned automatically.