Filter
Top Products
32
EN
Answering Machine Features
Adjusting the speaker volume
To adjust the speaker volume, press
(VOLUME+/–).
Notes
• When you have reached the minimum or maximum volume level, you will
hear three short beeps.
• You cannot adjust the speaker volume while the phone is ringing.
Tip
There are 8 steps for the volume level (1 to 8). The volume level is preset to 4.
Erasing messages
1 Press and hold (ERASE) for
more than 2 seconds.
2 Press a button for the mailbox
you want to erase ((MAILBOX1),
(MAILBOX2), or (MAILBOX3)).
A long confirmation beep
sounds and all messages in the
selected mailbox are erased.
To erase individual messages
Press (ERASE) while playing back the message that you want to erase.
Note
The display shows the total number of “new“ (i.e. unreviewed) messages.
Therefore, the display is reset to “0“ when you have played back all new
messages, whether they have been erased or not. Be sure to erase unnecessary
messages before the memory becomes full.
Playing back messages (continued)
(VOLUME+/–)
(ERASE)
(MAILBOX1)–(MAILBOX3)