Filter
Top Products
16
EN
Telephone Features
Telephone Features
1 Press (PGM).
The TALK lamp flashes quickly.
2 Press a dialing key ((0) to (9)) to
select the destination for the phone
number.
You will hear a confirmation beep.
3 Enter the phone number you want to
store.
You can enter up to 16 digits,
including a tone and a pause, each of
which is counted as one digit.
4 Press (SPEEDDIAL).
You will hear another confirmation
beep and the number is stored. The
TALK lamp goes off.
Speed dialing
TALK lamp
(REDIAL)
You can dial with a touch of a few keys by storing a phone number on
a dialing key. You can store up to 10 phone numbers separately on the
handset and on the base phone.
Storing phone numbers
Notes
• In step 3, if you do not enter the phone number, the previously stored number will be
erased.
• Do not allow more than 20 seconds to elapse between each step of the procedure.
• The handset must be off to store phone numbers.
• You cannnot store phone numbers on the handset while the speakerphone is being used
on the base phone. The TALK lamp will repeat sets of two flashes to indicate this
condition.
Tips
• If you enter a wrong number, press (SPEEDDIAL), then start from the beginning.
• Use the supplied directory to write down what you have stored to the speed dialing
numbers.
To store the previous number dialed
Press (REDIAL) directly after step 2, then go to step 4.