Sony PEG-TG50 PDAs & Smartphones User Manual


 
33
I cannot beam data
/
I cannot exchange data using the Bluetooth™ function
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
I cannot exchange data using the
Bluetooth™ function
The error message is displayed for insufficient memory
when I receive data by beaming
B To receive data using the IR port, the free space of your CLIÉ handheld’s
memory must be more than twice the size of data to be received. If the
memory space of your CLIÉ handheld is insufficient, delete any
unnecessary data after backing up data as needed.
B Perform a soft reset by pressing the reset button.
b
For details, refer to “Basic operations of your Sony CLIÉ™ handheld: Restarting
your Sony CLIÉ handheld” in the “Read This First (Operating Instructions).”
B Set to Enabled in the Bluetooth Preferences screen of “Prefs.”
Check that the blue Bluetooth LED turns on.
B If you have renamed a target Bluetooth™ compatible device registered on
your CLIÉ handheld, the device may be listed in the previous name when
you detect target Bluetooth™ compatible devices.
In this case, follow the procedure below.
1 Press and hold the Home /Menu button from the Bluetooth
Preferences screen.
2 Tap Disable device name cache from the Options menu.
3 Detect target Bluetooth™ compatible devices.
b For details, refer to “Have a try: Using the Bluetooth™ function” in the “Read
This First (Operating Instructions).”
B The file contents and the file names sometimes counterchange when you
transfer many files at the same time using the Bluetooth™ function.
Transfer files one by one when you use the Bluetooth™ function to
transfer files.