Filter
Top Products
85
Have a try
Conserving the battery
• Turn off the backlight under good lighting conditions.
b For details, refer to “POWER/HOLD switch” on page 95.
• Change the automatic power-off time setting so that your CLIÉ handheld
will automatically turn off after a short period of inactivity.
b For details, refer to “Customizing your CLIÉ™ handheld (Preferences): Setting the
automatic power-off time” in the “Handbook.”
Using peripheral devices
If a low battery warning is displayed while using peripheral devices, connect
to wall outlet immediately. Otherwise data in the internal memory may be lost.
When the battery power gets low
• When the battery power gets low, a warning message is displayed on the
screen, “Memory Stick” media becomes inaccessible, and the backlight
adjustment no longer operates. If this occurs, connect your CLIÉ handheld
to wall outlet and perform a HotSync
®
operation.
• If your CLIÉ handheld does not turn on when you slide down the POWER/
HOLD switch, charge your CLIÉ handheld immediately.
• The remaining battery indicator may not always reflect the actual battery
power remaining. To prevent loss of battery power, charge it frequently.
• You do not have to replace batteries. When battery power gets low, place
your CLIÉ handheld in the USB cradle and start charging immediately.
Never disassemble your CLIÉ handheld to take out the battery.
Other information
Your CLIÉ handheld may get warm if turned on for long periods of time. This
is not a malfunction.
Do not let the remaining battery power indicator reach 0
If you leave your CLIÉ handheld in an uncharged state (the remaining
battery power indicator reaches 0 ), all user data stored on your CLIÉ
handheld will be erased. To avoid this, you should charge your CLIÉ
handheld frequently.
Continued on next page
• • • • • • • • • • • • • • • • • • • • • • • • • • •