Filter
Top Products
14
Notes
• Always use the pointed end of the stylus for tapping or making strokes on your
CLIÉ handheld screen. Never use a writing pen, pencil, or other sharp object to
write on the screen.
• When you put the stylus back in its holder, push it in until it clicks into place.
3
Press lightly on the screen with the stylus.
This action is called “tapping.”
The Setup screen for digitizer calibration is displayed.
4
Following the on-screen instructions, tap exactly in the
center of the displayed mark.
Tap the next targets, which are displayed at
the bottom right and then in the center of
the screen.
Note
If the digitizer is not configured correctly, the
scroll bar may not operate properly, “tapping”
may not work as expected, or other problems
may occur.
b For details on reconfiguring the digitizer,
refer to “Customizing your CLIÉ™ handheld
(Preferences): Adjusting the Digitizer” in the “Handbook.”
After calibration is complete, a screen for setting the time and date is
displayed.
Press lightly on the
screen (Tap)
b