Filter
Top Products
snom 3x0 VoIP Phones User Manual English
© snom technology AG 2007
Getting Started
• 19
English
Registration
The phone attempts to register the first extension (SIP identity) using the account/
registrar data provided by the automatic or manual initialization.
L Note: Should the IP PBX (SIP registrar) require an
authentication
, you will be
prompted to enter the correct
password
. Make sure you are using the appropriate
input mode or enter the password via the web user interface, see page 38.
If the password is not accepted by the SIP registrar, you will be asked a second time
to enter the password. If this is also not accepted, the registration process will be
terminated for security reasons.
The registration status is shown on the idle screen (see page 93). The complete status
message sent by the SIP registrar in plain text can be evaluated on the web user
interface:
Status System Information SIP Identity Status
Example:
Identity 1 Status: smith1@sip.company.com: OK or
Identity 1 Status: 100@sip.company.com: Authentication failed or
Identity 1 Status: 100@192.168.0.100: Not found
Successful Registration
The first extension (SIP identity) has been registered successfully and will be used for
outgoing calls. This is displayed on the idle screen as follows:
snom 300 snom 320 snom 360 snom 370
ext1 time
date ext1 time
… … … …
ext1
date time
ext1
Unsuccessful Registration
If the first extension (SIP identity) could not be registered the displays shows:
snom 300 snom 320 snom 360 snom 370
NR time
NR = Not registered
date NR time
… … … …
NR = Not registered
ext1
date time
ext1
L Note: If the registration fails contact your network administrator.