Filter
Top Products
19
Use the memory management function to utilize the Organizer's
memory more efficiently.
Note:
• Before performing memory management, back up your data.
• While the memory management is in progress, do not press the
RESET switch. Doing so may result in losing all the data stored in
the Organizer.
1. Tap
TEL
, , or
TO
DO
to display “NAME?”,
“SCHEDULE?”, “TO DO?” or “MEMO?”.
2. Tap f
MENU
, select “MANAGE MEM.” using k or m.
3. When x is pressed, a message “PERFORM...” appears to
indicate that the memory management is in progress.
When done, the display will return to the initial screen.
Note:
• By performing memory management, the amount of reusable
memory (indicated in “MEMORY CHECK” under [MENU]) will be
utilized.
Managing the Organizer’s Memory Adjusting the LCD contrast
1. Tap
CLOCK
once or twice to display Home clock (with “ ”).
2. Press > or < to adjust the LCD contrast.
Secret Function
1. Registering a password
A Secret function is valid for Telephone, Schedule, To Do, and Memo
modes.
Up to 6 characters can be registered as the password.
If the password is forgotten, you cannot delete the password only. You
have to delete all the memory contents. (Perform steps 2 and 3 as
described in the section, “Using the Organizer for the First Time”.) As a
safeguard, make a written record of the password.
Registering a password
1. Tap
CLOCK
once or twice to display Home clock (with “ ”).
2. Tap .
3. Enter a password (case sensitive), e.g.
f ABC and press
ENTER
.
•“RECONFIRM !” is displayed.
• If “ERROR !” appears briefly, the password has already been
registered.
ZQ-P20A(En).pm65 08.1.24, 1:44 PM19