Filter
Top Products
10
Using the MM 100
̈ When the mobile phone prompts a keyword, enter 4 zeros (”0000”).
If pairing was successful, the LED ¿ flashes slowly in blue.
Some mobile phones require an additional step to connect to the headset. For details, refer to the manual of the
mobile phone.
Once paired, most mobile phones are able to automatically transfer the audio to the headset and, in addition,
show a headset symbol in their display.
Pairing is not successful
If pairing is not successful within 60 seconds, the headset returns into idle mode.
̈ On the mobile phone, start a search for Bluetooth devices (see the manual of your mobile phone) and follow
any instructions displayed on the mobile phone display.
Pairing to other Bluetooth audio devices
If you wish to pair the headset to other Bluetooth devices such as portable music players or laptops, please refer
to the manual of the Bluetooth audio device.
Multi-pairing
The MM 100 can simultaneously be paired to up to 2 devices, one supporting the HF/HS profile and one
supporting the A2DP, e.g. a mobile phone and a MP3 player.
̈ Pair the MM 100 to one of the devices (see “Pairing the headset” on page 9). If the MM 100 is only paired as
either an HFP/HSP or an A2DP device, you can pair it to a secondary Bluetooth device.
̈ When the headset is in standby mode (i.e. no active call and no music streaming), press and hold the Next
button » or Prev. button · for 5 seconds.
The LED ¿ flashes alternatingly in red and blue, indicating that the headset is in pairing mode and ready to
pair the secondary device.
̈ Follow the steps described under “Pairing to a mobile phone” on page 9, or the steps described in the manual
of any other device.
Using the MM 100
Wearing the headset
̈ Put on the headset as shown in the drawing.
MM 100
OK
Keyword
0000
¿
5 s
·
»
CAUTION! Danger of accidents!
The headset can draw off your attention.
̈ Do not wear the headset in an environment that requires your special attention (e.g. in traffic
or when performing skilled jobs)!