Filter
Top Products
9
Putting the MM 100 into operation
If a certain Bluetooth connection cannot be established, because the corresponding Bluetooth device is switched
off or out of range, you can manually re-establish the connection as follows:
̈ Switch off the Bluetooth visibility of all Bluetooth devices in the vicinity, except for the Bluetooth device you
want to connect to.
̈ Press the Play/Pause button º.
The LED ¿ flashes 3 times per second, indicating that the headset is in searching mode.
When the headset and the Bluetooth device detect each other, the connection is established. A high
confirmation beep is heard in the headset.
Switching the headset off
The headset switches off automatically 60 minutes after the last Bluetooth connection has ended (idle mode).
To manually switch the headset off:
̈ Press and hold the Play/Pause button º for 2 seconds.
A descending confirmation beep is heard in the headset and the LED ¿ flashes red twice, indicating that the
headset is switched off.
Pairing and volume settings are saved automatically when the headset is switched off.
Pairing the headset
You can pair the headset to up to 8 devices.
Bluetooth devices supporting:
• the advanced audio distribution profile (A2DP), e.g. a music mobile phone, a portable music player or laptop
(Windows Vista with update as of April 2007 or Mac OS X Leopard)
• the hands free (HFP) or headset (HSP) profile, e.g. mobile phones
Once you have paired the headset to a Bluetooth device, the headset automatically connects to the last paired
Bluetooth device each time this device and the headset detect each other.
Pairing to a mobile phone
Before pairing to a mobile phone, make sure:
• that the headset’s battery has been charged as described under “Charging the headset battery” on page 7,
• that your mobile phone is switched on and Bluetooth visibility is enabled,
• that the headset is switched off and placed close to the mobile phone (approx. 20 cm or 7”).
To enter pairing mode:
̈ Press and hold the Play/Pause button º for 5 seconds.
The LED ¿ flashes alternatingly in red and blue, indicating that the headset is in pairing mode.
̈ Once the headset is detected by the mobile phone, select “MM 100” and connect.
When the Bluetooth connection is successfully established, the headset is identified as “MM100” on the
mobile phone display.
¿
º
The headset saves up to 8 Bluetooth connection profiles of Bluetooth devices with which it has
been paired. If you want to re-establish a connection with a device with which the headset has
been paired, the connection needs to be established from this device (for details, refer to the
manual of the Bluetooth device). Before doing so, make sure that the last paired device is
disconnected.
º
2 s
¿
º
5 s
¿
If the headset is already switched on and is in standby or idle mode, you can enter pairing mode
by pressing and holding the Next button » or Prev. button · for 5 seconds.